Power LED - insights - Einblicke

know.leds

Description

  Power LED <> Micro El. LED
    Power LED <> Mikroel. LED

Power-LED are typically LEDs with a Power of at least 0.25W - 10W or more. Often a single Power LED is sufficient in its application to provide the Light that has to be produced.

 
Power-LED sind üblicherweise LEDs mit einer Leistung von mindestens 0.25W - 10W oder mehr. Häufig genügt eine einzige LED um die erforderliche Lichtmenge zu erzeugen.
Typical Power LED-Application of 2008

Micro Electronics LEDs are normally not intended for lighting-purpose in bigger extent. Their application is normally designed for back- or signallighting in electric devices. Their typical Power is below 0.2 Watts. If they are used for lighting purposes they have to be "clustered" to produce a certain minimal amount of useful light.

  Typische Power LED Anwendung von 2008

Mikroelectronik LEDs sind normalerweise nicht für Beleuchtungszwecke im grösseren Stil vorgesehen. Sie finden normalerweise als Hintergrund- oder Signallampen in elektrischen Apparaten Anwendung. Ihre Leistung liegt normalerweise unter 0.2 Watt. Werden sie trotzdem für Beleuchtungszwecke benutzt, sind sie zu gruppieren um eine minimale nutzbringende Lichtmenge zu gewähren.

Micro electronics LED-cluster Lamp (DIP-LEDs)
  Mikroelectronik-LED-Gruppen Lampe (DIP-LEDs)

SMD- or Piranha-LEDs are yet other form factors for LED-Packages with a big range of pwoer-levels. Like micro electroniscs LEDs SMD or Piranha-LEDs are typically used in big number in case they are intended for lighting purposes. Their lighting efficiency (lm/W) is equal woth good PowerLEDs but they have considerable lower power factors for each LED.

 
SMD- oder Piranha-LEDs sind andere Bauformen von LEDs, deren Leistungen stark unterschiedlich sein können. Wie Mikroelektronik-LEDs werden sie idR. in grosser anzahl angewendet, wenn Sie zu Beleuchtungszwecken genutzt werden. Sie sind in der Lichtausbeute (lm/W) guten PowerLEDs ebenbürtig, haben aber deutlich tiefere Leistungen pro LED.
onlux FlexiLux 120-60 WW - LED-Strip 5W/m
LED-Strips with SMD-LEDs
  LED-Strips with SMD-LEDs

The difference between Power- and Micro-LED in lighting output is impressive. It seems quite evident that with a decline of the prices of Power-LED the clustered low power LEDs will disappear completely from the Lighting market for Spotlight applications. The picture below shows the typical difference. Well focused, optically optimized light with the Power-LED while the LED-cluster diffuses into virtually "nothing" (from the little that there is effectively). However: There are huge differences in the performance of Power-LEDs as well. Check carefully before you "invest" your money. onlux Power LEDs are for sure the best choice - best in class and best value for money.
 

Der Unterschied zwischen Power- und Mikro-LED ist gemessen an der Lichtleistung beeindruckend. Es ist deshalb offensichtlich, dass mit sinkenden Power-LED Preisen die gruppierten Elektronik-LEDs für Spotlicht-Anwendungen vom Markt verdrängt werden.

Das Bild unten zeigt den typischen Unterschied deutlich. Gut gebündeltes, optisch optimiertes Licht der Power-LED, während das spärliche Licht der Elektronik-LED ins "virtuelle Nichts" diffundiert. Trotzdem ist auch beim Kauf von Power-LEDs Vorsicht geboten. Die Leistungsunterschiede können gewaltig sein. onlux Power-LEDs sind jedenfalls die beste Wahl - die besten Ihrer Klasse und die mit dem besten Preis-Leistungsverhältnis.
 
Power-LED with 15° optics <-> Cluster LED

What to expect from a good LED Lamp in 2012 ?


Don't trust (yet) if you're promised that a 3W LED will completely replace a 50W low voltage Halogenic Bulb! In fact it the best ones may replace an average 35Watt 12V Halo. onlux Deltalux 400D II can replace a 35W GU10 Spot-Bulb (230V Halo) (according to actual measurements of Swiss METAS (11-2011). The best (Benchmark) Power LED in the "mainstream" Market (onlux BijouLux warmwhite 3000°K) is providing 230 Lumen at 4W power consumption. A 50W Halo (GU10) can produce more than 340 Lumens but it also consumes more than 12 times the power! The power-efficiency of the good Power LEDs is between 100 and 140 lm/W (cool light) and 80-110 lm/W for warm light (about 30% less). In the system (Lamp) the performance will be considerably lower due to efficiency losses (electric, thermal and optical efficiency). The Power efficiency of a good Halo-System (12V -System e.g. with 20W Bulbs producing 300 lm) is no higher than 10-15 lm/W - 1/4 of the warm, 1/5 of the cool LED. Check out the lighting performance of the best in class Halo-replacement Power LED-Spots (MR16/GU5.3, PAR16/GU10) by onlog. onlog is leading the international rankings for LED-Lights with top quality light at best performing efficiency.

However: 2011 onlux was setting the benchmark with its MasLux-Lamps to a new level. The efficiency of the Piranha-LED-Based LED-Lamps is outstanding. These E27 and E14-Types fully replace incandescent Lamps. 10W LED with over 90lm/W (warmwhite, CRI > 80) to replace a 75W Bulb.

Picture below: LuxLux 200 (version 2008)
Coolwhite <-> Warmwhite light
 
Was ist von einer guten LED Lampe 2012 zu erwarten ?


Vorweg: Glauben Sie's (noch) nicht, wenn jemand verspricht, dass eine 3W LED eine 50W Nidervolt-Halogenbirne vollwertig ersetzt! Tatsächlich ersetzt eine DeltaLux 400D II von onlux eine durchschnittliche 230V 35 Watt GU10-Halo-Spotlampe (gemäss METAS-Messung vom November 2011). Die beste Power LED im Massenproduktemarkt (onlux BijouLux warmweiss 3000°K) leistet 230 Lumen bei 4W. Eine 50W Halo (GU10) kann mehr als 340 Lumen erzeugen, braucht allerdings auch 12x mehr Strom! Die Energieeffizienz guter Power LEDs liegt zwischen 80 und 110 lm/W (kaltweiss / Tageslicht) und 50-90 lm/W für warmes Licht (ca. 30% weniger). Im System (also in der Lampe) ist die LED-Effizienz durch "Reibungsverluste" i.d.R. deutlich tiefer (elektrische, thermische und optische Effizienz). Die Energieeffizienz eines guten Halo-Systems (12V mit z.B. 20W Birnen, die 300 Lumen erzeugen) ist nicht besser als 10-15 lm/W - also nur 1/4 so gut wie warmweisse und nur 1/5 so gut wie Tageslicht-LED. Erfahren Sie die Leuchtkraft der Klassenbesten Power LED Halo-Spot-Ersatzlampen (MR16/GU5.3, PAR16/GU10) durch onlog. onlux ist Testsieger und gemäss internationalen Rankings führend für LED-Spotlicht zum Ersatz von Halogen-Spotlampen.

Auch
setzte onlog 2011 mit den neuen MasLux-Lampen den Massstab für die Effizienz bei Piranha-Basierten LED-Lampen. Diese E27 und E14-Typen ersetzen herkömmliche Glühlampen vollwertig. 10W LED mit über 90lm/W (warmweiss, CRI > 80) ersetzen eine 75W Glühbirne.

Bild unten: LuxLux 200 (Version 2008)
Kaltweisses und warmweisses Licht im Vergleich
 
Lichtfarben der LuxLux 200L (2008)

COB High Power LED / Multi-Chip LED

More and more LED manufacturers are packing more than 1 power LEDs on one chip to achieve higher Lumen output and higher connecting power in the same. Typically high Power LEDs have more than 5W power and they generate at least 300 Lumen of Light. Some LEDs announced to the market claim for over 1000 Lumen at 10W Power. On the other hand COB-LEDs (Chip on Board) with up to 100W Power have been seen in the sourcing market. Besides a good power efficiency they provide a massive amount of light. Unfortunately heat dissipation requires its dimensions for the design of Lamps and bulbs but many applications like e.g. downlights and Streetlicghts are available through onlux.ch and bring some turbulence to the halo-replacement market.


Actual example of a high Power multi-chip LED
(CREE MC-E)
Below: 10W COB-LED
 
COB High Power LED / Multi-Chip LED

Die Zahl der LED-Hersteller, die mehr als eine Power LED auf einen Chip setzen um höhere Licht- und Anschlussleistung zu erreichen nimmt zu. Normalerweise haben High Power LEDs mehr als 5W Anschlussleistung und bringen mindestens 300 Lumen Licht. Einige LEDs, die am Markt angekündigt sind, proklamieren über 1000 Lumen bei nur 10W Leistung. Andererseits sind im Beschaffungsmarkt bereits COB-LEDs (Chip on Board) mit bis zu 100W Nennleistung zu finden. Neben einer ausgezeichneten Energieeffizienz werden so auch gewaltige Lichtmengen verfügbar. Leider erfordert die Wärmeableitung in Form von wohl dimensionierten Kühlkörpern ihren Tribut. Zahlreiche Anwendungen wie Downlights oder Flutlicht-Anlagen sind bei onlux.ch verfügbar und mischen den Markt für Halogen-Ersatzprodukte auf.

Beispiel einer High Power multi-chip LED
(CREE MC-E)
Darunter: 10W COB-LED
10W Multichip LED - Array with 4 LEDs

10W COB-LED
 
Back to TOC / top Zurück zum Inhaltsverzeichnis / Anfang
Revision 11.01.2012